When your washing machine malfunctions, it can be frustrating, but there are several common issues you can check before calling Duty Guy, your professional partners in appliance maintaining. Here are some things to look at:

Power Supply

It is also important to check the power supply as a first step, provided your washing machine is not working optimally. Make sure that the equipment is well connected to a working electrical supply. It remains now to make sure that the outlet is working, for this you can take any other device and plug it into the outlet to check if it functions or not. As well, it is important to check on your home’s circuit breaker box whether it has tripped or not; if tripped, then reset it. This can be corrected by establishing that it was only a power intermission, and once fixed can make the washing machine work again.

Water Supply

Next, check if the washing machine gets proper water supply to ensure that water is provided to the machine adequately. This should be done by turning on the two handles at the top of the sinks to allow the water to flow as much as it can. Check the water inlet hoses to ensure that they are free from twists or any constriction as well as bleeder hoses for any signs of leakage. This is true because washing machines are not designed to work if only a partial supply of water is provided.

Door/Lid

The knobs of your washing machine must be properly twisted and locked in place to start the entire machine. For the top loading machines, make sure that the lid switch is functioning by engaging. In most front-loading machines, the door lock assembly and mechanism should be operational. Look for an accumulation of dirt or abrasion on the rubber that would hinder tight closure of the door as well as foreign objects on the door seal that would hinder the smooth operation of the machine.

Drainage

Drainage is important when it comes to the washing machine so ensure that you fix one that is appropriate for your machine. The drain hose should be checked for correct positioning, for kinks, clogs as well as any improper positioning. If the hose is blocked or restricted, the machine cannot discharge water in the right manner because of blockage. Furthermore, if your machine uses a filter, it should be cleared to avoid becomes choked up as this authors observed. It is commonly places at the base or at the bottom of the machine and can often be accessed by removing a small plate or cover.

Balance

Balance problems may lead to violent oscillating movements or the machine is not able to function again. An important factor when loading the drum is that the weight of load must be evenly spread on the drum. These include washing small loads or just one big load can cause the dish balance and make them uneven. Also ensure the machine stands close to the ground or on leveled floor as far as possible. What one needs to understand is that most washing machines have feet that are adjustable, and which can be used in making a tilted washing machine to be level.

Error Codes

A lot of the newer models of washing machines also have an LED display which shows the particular code when there is an issue. Follow the instructions mentioned in the user manual, in order to find out about the nature of the codes because they can tell you more about the problem with the car. This error is usually caused by a problem relating to code the best way to solve it is by yourself without having a technician to assist you.

Mechanical Issues

Washers may experience mechanical problems such as a worn or broken drive belt that would hinder the machine from functioning. It might be that you are hearing strange noises, and this may be due to some trouble with the motor or the other parts of the devices. Check whether the belt that drives the generator is proper or not. In the course of the rebars or if the belt is damaged or become spoilt, there is a need to replace it.

Control Settings

Sometimes, it could be control settings that are gotten wrong Sometimes the problem becomes as basic as control settings. Confirm that the chosen wash cycle is appropriate and that the washer is not programmed to take a break or be overlaid. Shake the controller a little to be sure that all buttons and dials present function correctly and are not stuck.

By making a routine check in these areas that can be problematic then it’s normally possible to solve the issues with the washing machine without having to call in a professional. However, if the above action fails then the only option is to seek the assistance of a technician for further examination and rectification.